# Makefile.in generated by automake 1.16.2 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am for anaconda
#
# Copyright (C) 2009  Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published
# by the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# ======================================
# WARNING!
# THIS FILE IS GENERATED FROM A TEMPLATE
# DO NOT EDIT THIS FILE MANUALLY!
# ======================================
# The template is located in: branch-config.mk.j2

# Makefile include for branch specific configuration settings
#
# Copyright (C) 2020  Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published
# by the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# Store a branch specific configuration here to avoid dealing with
# conflicts on multiple places.


VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(dist_sbin_SCRIPTS) $(dist_noinst_DATA) \
	$(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = anaconda.spec
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(sbindir)"
SCRIPTS = $(dist_sbin_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(dist_noinst_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/./branch-config.mk $(srcdir)/Makefile.in \
	$(srcdir)/anaconda.spec.in $(srcdir)/config.h.in COPYING \
	compile config.guess config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.bz2
DIST_TARGETS = dist-bzip2
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
ANACONDA_RELEASE = @ANACONDA_RELEASE@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@
LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGCAT = @MSGCAT@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_RELEASE = @PACKAGE_RELEASE@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PYTHON = @PYTHON@
PYTHON3_CFLAGS = @PYTHON3_CFLAGS@
PYTHON3_LIBS = @PYTHON3_LIBS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RPM_CFLAGS = @RPM_CFLAGS@
RPM_LIBS = @RPM_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = data docs dracut po pyanaconda scripts tests widgets utils

# Include the xgettext wrapper so pot-update can be run from the source distribution
# This is needed for make distcheck.
EXTRA_DIST = COPYING $(srcdir)/translation-canary/xgettext_werror.sh
MAINTAINERCLEANFILES = Makefile.in config.guess config.h.in config.sub \
						depcomp install-sh ltmain.sh missing ABOUT-NLS \
						INSTALL aclocal.m4 configure *.pyc \
						py-compile m4/* po/Makefile.in.in po/Rules-quot \
						test-driver

CLEANFILES = *~
dist_noinst_DATA = $(PACKAGE_NAME).spec
dist_sbin_SCRIPTS = anaconda.py
ARCHIVE_TAG = $(PACKAGE_NAME)-$(PACKAGE_VERSION)-$(PACKAGE_RELEASE)
BUILD_RESULT_DIR = $(RESULT_DIR)/build
TEST_RESULT_DIR = $(RESULT_DIR)/tests
SRPM_BUILD_DIR = $(BUILD_RESULT_DIR)/00-srpm-build
RPM_BUILD_DIR = $(BUILD_RESULT_DIR)/01-rpm-build
TEST_INST_BUILD_DIR = $(BUILD_RESULT_DIR)/02-test-install

# Program for rendering infra Jinja2 templates
TEMPLATE_RENDERER = scripts/jinja-render
CI_TAG := $(or $(CI_TAG),$(GIT_BRANCH))
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/./branch-config.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;
$(srcdir)/./branch-config.mk $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
anaconda.spec: $(top_builddir)/config.status $(srcdir)/anaconda.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-dist_sbinSCRIPTS: $(dist_sbin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(dist_sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-dist_sbinSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(sbindir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-dist_sbinSCRIPTS
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_sbinSCRIPTS
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) all install-am install-exec-am \
	install-strip uninstall-am

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dist_sbinSCRIPTS \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-exec-hook install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-dist_sbinSCRIPTS uninstall-hook

.PRECIOUS: Makefile


# Name of the expected current git branch.
# This could be master, fXX-devel, fXX-release, rhelX-branch, rhel-X ...
GIT_BRANCH ?= rhel-9

# Directory for this anaconda branch in anaconda-l10n repository. This could be master, fXX, rhel-8 etc.
L10N_DIR ?= rhel-9

# Base container for our containers.
BASE_CONTAINER ?= registry-proxy.engineering.redhat.com/rh-osbs/ubi9:latest

# COPR repo for use in container builds.
# Can be @rhinstaller/Anaconda for master, or @rhinstaller/Anaconda-devel for branched Fedora.
COPR_REPO ?= rhinstaller-group/Anaconda

install-exec-hook:
	cd $(DESTDIR)$(sbindir) && mv anaconda.py anaconda

uninstall-hook:
	-cd $(DESTDIR)$(sbindir) && rm -f anaconda

# Set environment if 'make -f Makefile.am' is called to avoid autotools
srcdir ?= $(CURDIR)
# Set this to "true" if you want to have SRPM archive with test version
TEST_BUILD	?= "false"

# LOCALIZATION SETTINGS
L10N_REPOSITORY ?= https://github.com/rhinstaller/anaconda-l10n.git
# Branch used in anaconda-l10n repository. This should be master all the time.
GIT_L10N_BRANCH ?= master

RC_RELEASE ?= $(shell date -u +0.1.%Y%m%d%H%M%S)

PYTHON ?= python3
COVERAGE ?= $(PYTHON) -m coverage
USER_SITE_BASE ?= $(abs_top_builddir)/python-site
USER_SITE_PACKAGES ?= $(shell PYTHONUSERBASE=$(USER_SITE_BASE) $(PYTHON) -m site --user-site)

RESULT_DIR ?= $(abs_top_builddir)/result

CONTAINER_ENGINE ?= podman
# build/run tweaks for all containers, such as --cap-add
CONTAINER_BUILD_ARGS ?= --no-cache
# HACK: bash's builtin `test -r` fails when running on Ubuntu host (GitHub) due to incompatible seccomp profile
CONTAINER_TEST_ARGS ?= $(shell grep -q ID=ubuntu /etc/os-release && echo --security-opt=seccomp=unconfined)
CONTAINER_REGISTRY ?= quay.io
# Add additional args to the existing ones to container engine
CONTAINER_ADD_ARGS ?=

# anaconda-ci container
CI_DOCKERFILE ?= $(srcdir)/dockerfile/anaconda-ci
RPM_DOCKERFILE ?= $(srcdir)/dockerfile/anaconda-rpm
RELEASE_DOCKERFILE ?= $(srcdir)/dockerfile/anaconda-release
ISO_CREATOR_DOCKERFILE ?= $(srcdir)/dockerfile/anaconda-iso-creator
CI_NAME ?= $(CONTAINER_REGISTRY)/rhinstaller/anaconda-ci
RPM_NAME ?= $(CONTAINER_REGISTRY)/rhinstaller/anaconda-rpm
RELEASE_NAME ?= $(CONTAINER_REGISTRY)/rhinstaller/anaconda-release
ISO_CREATOR_NAME ?= $(CONTAINER_REGISTRY)/rhinstaller/anaconda-iso-creator
CI_TEST_ARGS ?= --rm -v $(srcdir):/anaconda:Z
CI_CMD ?= make ci

SKIP_BRANCHING_CHECK ?= "false"

# If translations are present, run tests on the .po files before tarring them
# up. Use a weird looking loop because shell doesn't have a good way to test
# for a wildcard
dist-hook:
	for p in $(distdir)/po/*.po ; do \
	    if [ -e "$$p" ]; then \
		PYTHONPATH=$(srcdir)/translation-canary $(PYTHON) -m translation_canary.translated \
		    --release $(distdir)/po ; \
	    fi ; \
	    break ; \
	done

tag:
	@git tag -s -a -m "Tag as $(ARCHIVE_TAG)" $(ARCHIVE_TAG)
	@echo "Tagged as $(ARCHIVE_TAG)"

po-pull:
	TEMP_DIR=$$(mktemp --tmpdir -d anaconda-localization-XXXXXXXXXX) && \
	git clone --depth 1 -b $(GIT_L10N_BRANCH) -- $(L10N_REPOSITORY) $$TEMP_DIR && \
	cp $$TEMP_DIR/$(L10N_DIR)/*.po $(srcdir)/po/ && \
	rm -rf $$TEMP_DIR

pot:
	$(MAKE) -C po $(PACKAGE_NAME).pot-update
	rm $(srcdir)/po/{main,extra}.pot

pot-update-check: pot
# This check is used by github action for auto update of pot file
# This algorithm will make these steps:
# - clone localization repository
# - copy pot file to this repository
# - check if pot file is changed (ignore the POT-Creation-Date otherwise it's always changed)
	@TEMP_DIR=$$(mktemp --tmpdir -d anaconda-localization-XXXXXXXXXX) || exit 5 ; \
	git clone --depth 1 -b $(GIT_L10N_BRANCH) -- $(L10N_REPOSITORY) $$TEMP_DIR || exit 6 ; \
	cp $(srcdir)/po/anaconda.pot $$TEMP_DIR/$(L10N_DIR)/ || exit 7 ; \
	pushd $$TEMP_DIR/$(L10N_DIR) ; \
	git difftool --trust-exit-code -y -x "diff -u -I '^\"POT-Creation-Date: .*$$'" HEAD ./anaconda.pot &>/dev/null ; \
	RESULT=$$?; \
	popd ; \
	rm -rf $$TEMP_DIR; \
	if [ $$RESULT -eq 0  ] ; then \
		echo "Pot file is up to date."; \
	else \
		echo "Pot file needs update! Please update the pot file ./po/anaconda.pot in $(L10N_REPOSITORY)"; \
	fi ;

# Try to fetch translations, but if that fails just keep going
po-fallback:
	-$(MAKE) po-pull

scratch:
	if [ "$(TEST_BUILD)" == "true" ]; then \
		sed -ri '/AC_INIT/ s/\[[0-9.]+\]/[999999999]/' $(srcdir)/configure.ac; \
	fi
	$(MAKE) ARCHIVE_TAG=HEAD dist

scratch-bumpver:
	@opts="-S -n $(PACKAGE_NAME) -v $(PACKAGE_VERSION) -r $(PACKAGE_RELEASE) -b $(PACKAGE_BUGREPORT) --newrelease $(RC_RELEASE)" ; \
	if [ ! -z "$(IGNORE)" ]; then \
		opts="$${opts} -i $(IGNORE)" ; \
	fi ; \
	if [ ! -z "$(MAP)" ]; then \
		opts="$${opts} -m $(MAP)" ; \
	fi ; \
	if [ ! -z "$(BZDEBUG)" ]; then \
		opts="$${opts} -d" ; \
	fi ; \
	( cd $(srcdir) && scripts/makebumpver $${opts} ) || exit 1 ; \
	$(MAKE) -C po $(PACKAGE_NAME).pot-update

release:
	$(MAKE) po-pull
	$(MAKE) dist

container-release:
	$(CONTAINER_ENGINE) run \
	$(CONTAINER_TEST_ARGS) \
	$(CI_TEST_ARGS) \
	$(CONTAINER_ADD_ARGS) \
	$(RELEASE_NAME):$(CI_TAG) \
	sh -exc './autogen.sh && ./configure && make release'

release-and-tag:
	$(MAKE) dist
	$(MAKE) tag

anaconda-ci-build:
	$(CONTAINER_ENGINE) build \
	$(CONTAINER_BUILD_ARGS) --pull-always \
	$(CONTAINER_ADD_ARGS) \
	--build-arg=git_branch=$(GIT_BRANCH) \
	--build-arg=image=$(BASE_CONTAINER) \
	--build-arg=copr_repo=$(COPR_REPO) \
	-t $(CI_NAME):$(CI_TAG) \
	$(CI_DOCKERFILE)

anaconda-rpm-build:
	$(CONTAINER_ENGINE) build \
	$(CONTAINER_BUILD_ARGS) --pull-always \
	$(CONTAINER_ADD_ARGS) \
	--build-arg=git_branch=$(GIT_BRANCH) \
	--build-arg=image=$(BASE_CONTAINER) \
	--build-arg=copr_repo=$(COPR_REPO) \
	-t $(RPM_NAME):$(CI_TAG) \
	$(RPM_DOCKERFILE)

anaconda-release-build: anaconda-rpm-build
	$(CONTAINER_ENGINE) build \
	$(CONTAINER_BUILD_ARGS) \
	$(CONTAINER_ADD_ARGS) \
	-t $(RELEASE_NAME):$(CI_TAG) \
	$(RELEASE_DOCKERFILE)

anaconda-iso-creator-build:
	$(CONTAINER_ENGINE) build \
	$(CONTAINER_BUILD_ARGS) --pull-always \
	$(CONTAINER_ADD_ARGS) \
	--build-arg=image=$(BASE_CONTAINER) \
	-t $(ISO_CREATOR_NAME):$(CI_TAG) \
  $(ISO_CREATOR_DOCKERFILE)

# User has to be logged first to be able to push the image.
# See `podman login` for more info.
anaconda-ci-push:
	$(CONTAINER_ENGINE) push \
	$(CONTAINER_ADD_ARGS) \
	$(CI_NAME):$(CI_TAG)

anaconda-rpm-push:
	$(CONTAINER_ENGINE) push \
	$(CONTAINER_ADD_ARGS) \
	$(RPM_NAME):$(CI_TAG)

bumpver: po-pull
	@opts="-n $(PACKAGE_NAME) -v $(PACKAGE_VERSION) -r $(PACKAGE_RELEASE) -b $(PACKAGE_BUGREPORT)" ; \
	if [ ! -z "$(IGNORE)" ]; then \
		opts="$${opts} -i $(IGNORE)" ; \
	fi ; \
	if [ ! -z "$(MAP)" ]; then \
		opts="$${opts} -m $(MAP)" ; \
	fi ; \
	if [ ! -z "$(BZDEBUG)" ]; then \
		opts="$${opts} -d" ; \
	fi ; \
	if [ ! -z "$(SKIP_ACKS)" ]; then \
		opts="$${opts} -s" ; \
	fi ; \
	( cd $(srcdir) && scripts/makebumpver $${opts} ) || exit 1
	-$(MAKE) pot-update-check

# (s)rpm builds

srpm: scratch anaconda.spec
	rpmbuild --define "_sourcedir $(abs_srcdir)" --define "_srcrpmdir $(SRPM_BUILD_DIR)" -bs anaconda.spec

rpms: srpm
	rpmbuild --rebuild --define "_rpmdir $(RPM_BUILD_DIR)" $(SRPM_BUILD_DIR)/anaconda-*.src.rpm
	mv "$(RPM_BUILD_DIR)"/*/*.rpm "$(RPM_BUILD_DIR)" # move rpms from per-architecture subdirectory

# GUI TESTING
runglade:
	ANACONDA_DATA=$(srcdir)/data \
	ANACONDA_WIDGETS_OVERRIDES=$(srcdir)/widgets/python \
	PYTHONPATH=$(srcdir):$(builddir)/pyanaconda/isys/.libs:$(srcdir)/widgets/python/:$(builddir)/widgets/src/.libs/ \
	LD_LIBRARY_PATH=$(builddir)/widgets/src/.libs \
	UIPATH=$(srcdir)/pyanaconda/ui/gui/ \
	GI_TYPELIB_PATH=$(builddir)/widgets/src/ \
	GLADE_CATALOG_SEARCH_PATH=$(srcdir)/widgets/glade \
	GLADE_MODULE_SEARCH_PATH=$(builddir)/widgets/src/.libs \
	glade ${GLADE_FILE}

ci:
	$(MAKE) run-tests || echo $$? > $(srcdir)/tests/error_occured
	$(MAKE) grab-logs

	@if [ -f $(srcdir)/tests/error_occured ]; then \
		echo "TEST FAILED"; \
		status=$$(cat $(srcdir)/tests/error_occured); \
		rm $(srcdir)/tests/error_occured; \
		exit $$status; \
	fi

# container-ci target will have disabled cockpit Makefiles by default
# The SYS_CHROOT capability is required for user creation tests and was dropped on podman 4.4.X
# https://bugzilla.redhat.com/show_bug.cgi?id=2170568
container-ci:
	$(CONTAINER_ENGINE) run \
	--entrypoint /anaconda/dockerfile/anaconda-ci/run-build-and-arg \
	$(CONTAINER_TEST_ARGS) \
	$(CI_TEST_ARGS) \
	--cap-add=SYS_CHROOT \
	$(CONTAINER_ADD_ARGS) \
	$(CI_NAME):$(CI_TAG) \
	$(CI_CMD)

# The SYS_CHROOT capability is required for user creation tests and was dropped on podman 4.4.X
# https://bugzilla.redhat.com/show_bug.cgi?id=2170568
container-shell:
	$(CONTAINER_ENGINE) run -it \
	$(CONTAINER_TEST_ARGS) \
	$(CONTAINER_ADD_ARGS) \
	$(CI_TEST_ARGS) \
	--cap-add=SYS_CHROOT \
	$(CI_NAME):$(CI_TAG)

container-rpm-test:
	$(CONTAINER_ENGINE) run \
	$(CONTAINER_TEST_ARGS) \
	$(CI_TEST_ARGS) \
	-v $(CI_DOCKERFILE)/run-build-and-arg:/run-build-and-arg \
	$(CONTAINER_ADD_ARGS) \
	$(RPM_NAME):$(CI_TAG) \
	sh -exc ' \
	    /run-build-and-arg make run-rpm-tests-only; \
	    dnf install -y /tmp/anaconda/result/build/01-rpm-build/*.rpm'

container-rpms:
	$(CONTAINER_ENGINE) run \
	$(CONTAINER_TEST_ARGS) \
	$(CI_TEST_ARGS) \
	-v $(CI_DOCKERFILE)/run-build-and-arg:/run-build-and-arg \
	$(CONTAINER_ADD_ARGS) \
	$(RPM_NAME):$(CI_TAG) \
	sh -exc ' \
			/run-build-and-arg make rpms && \
			rm -rf ./result && \
			cp -rv /tmp/anaconda/result ./'

container-rpms-scratch:
	$(MAKE) -f ./Makefile.am CONTAINER_ADD_ARGS="-e TEST_BUILD=true" container-rpms

check-branching:
# checking if branching can be finished and all the pieces are in place
	@echo "===================================="
	@echo "Testing branch configuration"
	@echo "===================================="
	@if [ "$(SKIP_BRANCHING_CHECK)" != "false" ]; then \
		echo "skipping..."; \
	else \
		CURRENT_BRANCH=$$(git rev-parse --abbrev-ref HEAD); \
		if [ "$$CURRENT_BRANCH" != "$(GIT_BRANCH)" ]; then \
			echo "*** Configuration is not adjusted for current branch!"; \
			echo "This check will work only on main development branch fXX-release, rhel-X ..."; \
			echo "current branch:  $$CURRENT_BRANCH"; \
			echo "expected branch: $(GIT_BRANCH)"; \
			exit 1; \
		fi; \
	fi

	@echo "===================================="
	@echo "Testing localization for $(L10N_DIR)"
	@echo "===================================="
	@curl --fail --silent --show-error -L https://raw.githubusercontent.com/rhinstaller/anaconda-l10n/$(GIT_L10N_BRANCH)/$(L10N_DIR)/anaconda.pot >/dev/null ||  \
		(echo "*** Can't download translations from a localization repository"; \
		 echo "repository: $(L10N_REPOSITORY)"; \
		 echo "branch:     $(GIT_L10N_BRANCH)"; \
		 echo "directory:  $(L10N_DIR)"; \
		 exit 2)

	@echo "===================================="
	@echo "Testing pykickstart configuration"
	@echo "===================================="
	@substituted_branch=$$(echo "$(GIT_BRANCH)" | sed 's/^master$$/DEVEL/'); \
	for i in $$(git grep 'from pykickstart.version import DEVEL as VERSION' -- pyanaconda/ dracut/ | awk -F "[: ]" '{print $$1 ";" $$5}'); do \
		i=$${i^^}; \
		if [ "$${i#*;}" != "$$substituted_branch" ]; then \
			echo "$${i%;*} is not substituted properly!"; \
			exit 3;\
		fi; \
	done

	@echo "SUCCESS"

grab-logs:
# can't be used after tests automatically because make will end when tests fails
# clean result dir
	-rm -rf $(TEST_RESULT_DIR)
	mkdir -p $(TEST_RESULT_DIR)

	-cd $(top_builddir)/tests/ && cp -r --parents ./**/*.log ./*.log* $(TEST_RESULT_DIR)
	-cd $(top_builddir)/tests/ && cp -r --parents ./*.log* $(TEST_RESULT_DIR)

run-tests:
	@mkdir -p $(USER_SITE_PACKAGES)
	@cp $(abs_builddir)/tests/usercustomize.py $(USER_SITE_PACKAGES)
	$(MAKE)
	$(MAKE) TMPDIR=/var/tmp COVERAGE_PROCESS_START=$(abs_builddir)/.coveragerc \
	    TEST_SUITE_LOG=test-suite.log PYTHONUSERBASE=$(USER_SITE_BASE) check
	@tail -n 1 tests/gettext_tests/*.log > tests/gettext_tests/gettext_tests.log
	@rm -rf $(USER_SITE_BASE)
	$(MAKE) coverage-report

tests-pep8:
	$(MAKE)
	$(MAKE) TMPDIR=/var/tmp TEST_SUITE_LOG=test-suite.log TESTS=pep8/runpep8.sh check

tests-pylint:
	$(MAKE)
	$(MAKE) TMPDIR=/var/tmp TEST_SUITE_LOG=test-suite.log TESTS=pylint/runpylint.py check

tests-unit-only:
	@mkdir -p $(USER_SITE_PACKAGES)
	@cp $(abs_builddir)/tests/usercustomize.py $(USER_SITE_PACKAGES)
	$(MAKE)
	$(MAKE) -C $(srcdir) TMPDIR=/var/tmp COVERAGE_PROCESS_START=$(abs_builddir)/.coveragerc \
		TEST_SUITE_LOG=test-suite.log TESTS=unit_tests.sh \
		PYTHONUSERBASE=$(USER_SITE_BASE) check
	@rm -rf $(USER_SITE_BASE)
	$(MAKE) coverage-report

run-rpm-tests-only: rpms
	$(MAKE) TEST_SUITE_LOG=test-suite.log RPM_PATH=$(RPM_BUILD_DIR) \
			ROOT_ANACONDA_PATH=$(abs_srcdir) TESTS=rpm_tests.sh check

coverage-report:
	$(COVERAGE) combine tests/.coverage.*
	$(COVERAGE) report -m --omit "tests/*" > tests/coverage-report.log
	$(COVERAGE) report -m --include "tests/*" > tests/coverage-tests.log
	$(COVERAGE) report -m --include "pyanaconda/dbus*,pyanaconda/modules/*,pyanaconda/core/*" \
								     > tests/coverage-modular.log
	@cat tests/coverage-report.log

reload-infra:
	@for template in $$(find . -type f -name '*.j2'); do \
		$(TEMPLATE_RENDERER) $${template} $${template%.j2}; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: